What mold remediation costs, before anyone calls you.
Seven questions, a planning band from published 2026 data, and one remediation company for your area.
Tap a marker to see causes, signs, and cost.
How the estimate works
-
Tell us where and how big
Seven short questions: where the mold is, the size of the patch, whether you can see it, and any recent water event.
-
See the band on screen
The estimate comes from published 2026 cost data, line by line, before you share a single contact detail.
-
One company replies
Send it on and the featured remediation company for your area confirms the scope on site. No bidding list, no five calls.
Cost bands at a glance
Professional remediation runs $10 to $25 per square foot. The scope decides where a job lands inside that.
$500 to $1,500
Small, contained area
Visible growth on one surface, under about a door in size, professional cleanup.
$1,200 to $3,750
Typical professional job
One room or one problem area, containment, removal, and clearance.
$500 to $700
Inspection with air samples
Two air samples and lab analysis. Visual-only inspections start lower.
$3,000 to $10,000
HVAC system remediation
Air handler, coil, and ducts. Duct cleaning alone runs $500 to $2,000.
$10,000 to $30,000
Whole house
Several areas, usually after a long leak or a flood.
Twelve cost guides
Every band with its source, what drives the price, and when insurance applies.
Where mold grows, and what each spot usually costs
- Attic mold Roof leaks, bath fans that vent into the attic, and winter condensation on cold sheathing.
- Basement mold Foundation seepage, high humidity, and finished walls that trap moisture against block.
- Crawl space mold Open vents in humid climates, bare dirt floors, and plumbing leaks nobody sees.
- Bathroom mold Grout and caulk growth from steam, and hidden rot behind tub surrounds.
- HVAC and duct mold Wet evaporator coils, drain pans, and ducts that spread spores through every room.
- Black mold Stachybotrys on wet drywall and paper after a leak that ran for days or weeks.
- Mold after flooding Standing water, Category 3 contamination, and the 24 to 48 hour window before growth starts.
- Mold behind walls Hidden growth from plumbing leaks and window flashing, found by smell before sight.
- Mold around windows Condensation on cold glass, failed flashing, and sills that stay wet all winter.
- Mold in closets and storage Still air against an exterior wall, cardboard, and clothing that holds humidity.
Four services, priced apart
A good quote keeps them separate, and so does the estimate.
All twelve cost guidesInspection
A trained look at the extent and the moisture source. Priced on its own.
Testing
Air and surface samples with lab analysis. Useful for hidden growth and clearance.
Remediation
Containment, removal of affected material, HEPA cleaning, and antimicrobial treatment.
HVAC cleaning
Coils, pans, air handler, and ducts, so the system stops moving spores.
Why the estimate comes first
EPA draws the line at about 10 square feet. Under that, with the moisture source fixed, most homeowners can clean it themselves. Over that, or after a lot of water damage, EPA points to professional guidance. The estimate tells you which side you are on before a truck rolls.
It also separates the two things people confuse. An inspection finds the extent and the moisture source and runs $300 to $800. Remediation removes the growth and runs per square foot. A company that quotes the second without doing the first is guessing.
Under about 10 sq ft
Usually a homeowner job once the leak is fixed. The flow says so and shows the professional price anyway.
Over 10 sq ft, or after a water event
Professional scope. Containment, removal, HEPA cleaning, and a dry moisture source before the walls close.
Hidden or smelled, not seen
Inspection first. The band includes it, and the remediation line stays open until the extent is known.
What this site is, in plain terms
Sourced cost data
Every band cites This Old House, Fixr, HomeWyse, Angi, ServPro, or EPA, with the date we checked it. The engine ships with no regional guesswork.
Who operates it
ThriveUp LLC, Greenville, South Carolina. Launched November 2026. Remediation companies on the site are independent businesses.
How leads are handled
Your request goes to one featured company for your city, or to us by hand where no company has claimed the city. Emergency requests skip the queue and a person calls back. Details are stored for that purpose and never sold.
Questions people ask
How accurate is the estimate?
It is a planning band, not a quote. Every number traces to a published 2026 source such as This Old House, Fixr, HomeWyse, and Angi, and the sources are listed on each cost page. A remediation company confirms the scope on site, and that visit is the only firm price.
Is the estimate free?
Yes. The band appears on screen before you share any contact details. Sending it to the featured remediation company is also free and carries no obligation.
Who gets my details?
One featured remediation company for your area, plus us. There is no bidding list and your details are never sold.
What if the area is small?
EPA says areas under about 10 square feet are usually a homeowner job once the moisture source is fixed. The flow tells you when that applies and still shows what a professional would charge.
Do you cover my city?
The estimate works anywhere in the United States. Featured remediation companies are added one per market, starting with the South Carolina Upstate. Where no company has claimed a city yet, we forward the request by hand.
What if it is an emergency?
Press the emergency button. Four fields, no estimate questions, and a person calls you back ahead of every standard inquiry. For a life-safety emergency, a gas smell, or water near wiring, call 911 or your utility first.
Who runs MoldEstimates?
ThriveUp LLC in Greenville, South Carolina. The site launched in November 2026.
See your number before anyone calls
Seven questions, a planning band from published 2026 data, then one remediation company if you want it.
Run a remediation company? One company per market. Two production days a month, ads on your own footage, every page in your territory.